Low rainfall has left most people living in the rural areas of Australia in bad condition. They encounter economic losses and loss of human life.
The cost of water in the rural regions of Australia is increasing due to water inflation. That’s why the borehole water association is encouraging the residents to use underground water. The underground water is pure and natural, making it suitable for consumption.
Everyone has a right to use borehole water. It provides a self-sufficient edge to consumers. But is a water borehole worth the investment? Although a water borehole may require a large upfront cost, it is a long-term investment. If properly constructed, it can last for ten to fifteen years with proper maintenance.
In most rural areas, people walk long distances to fetch water from the streams or rivers. A borehole is of great benefit because it lightens the burden of water collection. What comes into many people’s minds when they hear about underground water is how to create a well-designed borehole?
Water Bore Drilling involves making a deep hole to tap a natural resource. However, this process is difficult. It requires planning and research to ensure that you come up with a well-constructed borehole.
Here is a simple guide to the process of water borehole drilling.
Site Consultation
A geological survey is essential when drilling water because it helps one know the right site for the borehole and the methods to use. Also, it helps to predict the water yields depth to drill the borehole.
Water Bore Drilling might not be convenient. There might be some dangerous chemicals in the site, natural hazards, or man-made infrastructures such as cables. That’s why it is good to hire a professional hydro-geologist. They use advanced tools to give you a clear picture of the site and likely water quality and yields.
Drilling and Lining of the Borehole
The Water Bore Drilling process is difficult. Thus, it is necessary to consider the services of a drilling company. A good firm should have a wide range of drilling rigs that can work in any location. The depth of your borehole will determine the information provided by the geological survey. Once the borehole drilling is complete, it is good to perform lining of the surface to filter the water and protect the well against the intrusion of surface contaminants.
Pumping and Water Testing
To gauge the yield of the borehole water, you may require performing a pump test. It helps to assess the volume of water the borehole can produce and the speed at which it can release the water.
The water testing process helps to determine the bacteria present in the water. This step is vital, as it will help you know the method of water treatment to use.
System Design
The water delivery system design is based on the speed of the water. If the surrounding rocks release water at a slow speed, you’ll need to install a storage tank on the surface to ensure efficient water flow. If the water release is fast, your borehole can a storage reservoir.
